Skip to content Skip to sidebar Skip to footer

Kwikset SmartCode 913 User Manual

Simplest Kwikset SmartCode 913 User Manual
Simplest Kwikset SmartCode 913 User Manual

Taking along a bunch of keys with you in your pocket or wallet is sometimes uncomfortable because of its sound. Moreover, getting along the keys with you sometimes also creates a problem because of silly mistakes. On the other hand, a common and general lock might not be the best protection as it can be broken easily. So, the best solution for this is Kwikset SmartCode 913. Here, you need Kwikset SmartCode 913 User Manual as your guidance to install and operate it. 

Simplest Kwikset SmartCode 913 User Manual 

Kwikset Smartcode 913 is a smart-lock completed with a 30-seconds auto-lock option and one-touch locking. It also has 16 customizable codes to ensure high security for your house. Here are some simplest Kwikset SmartCode 913 User Manual. 

1. Prepare and check the door dimension 

Measure the hole in the door for about 38-54 mm, the back-set is about 60-70mm, the door edge is about 25mm, and the door is about 35-51mm thick. 

2. Install the strike and latch 

You can use an optional latch depending on whether the edge door is chiseled or not. Installing both the strike and the latch properly. You also need to make sure that the door frame is drilled about 25mm deep. 

3. Install the exterior and interior assembly of the keypad 

The diameter of the hole in the door must be around 54mm to install the exterior and interior assembly keypad. Tighten with available screws that come together with the smart lock. 

4. Install the batteries and add your user codes 

This smart lock requires four AA batteries so install it properly. Then you can do the programming smart-lock by adding user codes maximum of 16 numbers. When the light turns green, the smart lock is ready. 

5. Test the lock and re-key the lock 

Check if the smart lock works properly by closing and opening the door. You need to remove the battery first before you re-key the lock. Once you have done, re-install the battery to its place. Kwikset SmartCode 913 User Manual finishes here.

Post a Comment for "Kwikset SmartCode 913 User Manual"